Gas induction pilot scale hydrogenation reactors
Pilot scale hydrogenation reactors/Pilot scale hydrogenation reactors/Pilot hydrogenation reactors/ Gas induction reactors/ Pilot hydrogenation autoclaves/ 500ltr hydrogenation reactors are used for scale up and smaller productions in Pilot Plants and kilolabs.
- HXCHEM
- China
- 60days
- 100sets/month
Details
Pilot scale hydrogenation reactors/ Hydrogenators
Hollow gas induction impellers/ Magnetic coupling dirve agitator
Introduction
The hydrogenation system usually involves a three-phase slurry, the solid catalyst in slurry phase and the hydrogen bubbles as the gas phase. As there are a number of phase boundaries the mass transfer, and especially the hydrogen dispersion, is a very factor. The mixing system that is employed in the reactor influences the mass transfer coefficient of the gas-liquid transfer greatly. HXCHEM provides hydrogenation reactor in lab, pilot and industrial scale. The pilot scale hydrogenation reactor also involes various gas induction tech. and no leakage magenetic coupling drive agitator for hydrogenation mission.The hydrogenation reactor can be design and fabricate based on GB or ASME code. The heating method would be jacket or oil electric heating method, and equipped with internal cooling coils for temperature control. Pls offer your specific requirements, we will design and offer suggestions based on your process.
Gas induction impeller/ Magnetic coupling drive tech for hydrogenation autoclaves
Parameter
Pilot scale hydrogenation reactors/Pilot scale hydrogenation reactors/Pilot hydrogenation reactors/ Gas induction reactors/ Pilot hydrogenation autoclaves/ 500ltr hydrogenation reactors are used for scale up and smaller productions in Pilot Plants and kilolabs.
GSH pilot pressure reactor standard specification
GSH-50 | ||||
50 | ||||
Standard 100bar, -0.1-250 bar customized | ||||
SS304 or SS316 wetted parts, other alloys (Titanium, Hastelloy, Duplex steel, etc.) | ||||
0~350 customize based on operate temp. | ||||
0-500 | ||||
1.5 | ||||
According to the working temperature | ||||
Standard electric heating(Thermal oil, steam, far infrared heating available) | ||||
Flat cover or elliptical flange closure | ||||
Propeller, paddle, anchor, spiral, turbine, gas inducing type, etc | ||||
Spiral cooling cools with cooling water | ||||
Discharging from bottom or above. | ||||
PID temperature display and control, accuracy±1 ℃; Stirring speed display; Operation time display; Heating voltage and current display; Touch screen optional. | ||||
Pressure gauge, Safety valve port; Temp. measuring port; Gas and liquid port; Dip tube; Vent port; Solid charging port; Cooling coil inlet and outler port; |
CASES