Hastelloy C276 made Stirred Lab pressure reactor with lift and tilt
Vertical stirred autoclaves | Floor stands or moveable cart type. Laboratory autoclaves with 250 ml to 5 liters volume. Max pressure: 200 bar; Max temperature up to 500 ℃ Low to high torque magnetic couplings: static seal with no leakage. Available material:SS304, SS316, Titanium, Nickel, Hastelloy B/C, Monel, Zirconium, Inconel, Tantalum Lifting and tilting device for easy operation,low labor cost. Monitor and control: Temperature, pressure, motor speed, gas / liquid flow, level, etc Safety Device (Blasting Disc) on Security Blasting Port. Customized according to customers requirement.
- HXCHEM
- China
- 7 days after payment
- 30 sets/month
Details
Stirred Lab Autoclaves With Manual Head Lift And Vessel Tilt
Introduction
This serious autoclaves is equipped with the lift and flip device, the kettle lid can open easily and the kettle vessel can be tilted quickly, witch is very suitable for lab experiment and test. Same as the GSH series reactor, the product equipped with features of magnetic seal (static seal), no leakage, smooth run, low noise and easy operation.
When special alloy construction is specified for a reactor, the head, cylinder and all internal wetted parts of the vessel will be made of the prescribed material, with the external valves and fittings constructed of stainless steel. Usually the external parts are not subject to the same corrosive conditions which exist inside the vessel, therefore, this will reduce the large amounts of cost.
Product Features
? Floor stands or moveable cart type.
? Laboratory autoclaves with 250 ml to 5 liters volume.
? Max pressure: 200 bar; Max temperature up to 500 ℃
? Low to high torque magnetic couplings: static seal with no leakage.
? Available material:SS304, SS316, Titanium, Nickel, Hastelloy B/C, Monel, Zirconium, Inconel, Tantalum
? Lifting and tilting device for easy operation,low labor cost.
? Monitor and control: Temperature, pressure, motor speed, gas / liquid flow, level, etc
? Safety Device (Blasting Disc) on Security Blasting Port.
? Customized according to customers requirement.
Standard Specifications
Model No. | GSHK-0.25 | GSHK-0.5 | GSHK-1 | GSHK-2 | GSHK-3 | GSHK-5 |
Capacity (L) | 0.25 | 0.5 | 1 | 2 | 3 | 5 |
Working Pressure (MPa) | 10 | 10 | 10 | 10 | 10 | 10 |
Working Temperature(℃) | 350 | 350 | 350 | 350 | 350 | 350 |
Stirring Speed (r/min) | 0-1500 | 0-1500 | 0-1500 | 0-1500 | 0-1500 | 0-1500 |
Motor power (kW) | 0.15 | 0.15 | 0.2 | 0.2 | 0.2 | 0.6 |
Heating Power (kW) | 1 | 1 | 2 | 2 | 3 | 4 |
Heating Method | General electric heating(water recycling, thermal oil heating available | |||||
Cooling Method | Spiral coils(Single coils, serpentine coils available) | |||||
Charging Method | Charging from above(Bottom valve available) | |||||
Stirring type | Propeller, paddle type, anchor type or customized | |||||
Lifting and tilting type | Mannual operation | |||||
Control panel | Temperature, time and heating voltage display Temperature adjustment control, accuracy±1 ℃ Stirring speed display and control | |||||
Standard fittings | Pressure Gage; Thermocouple; Internal Stirring System Liquid inlet and gas inlet with needle valve;Gas Release Valve Dip Tube; Safety Rupture Disc; Cooling Coil |
Product Details
Structure Drawings
Control System
Internal Components