Floor stand vertical pressure reactor

Introduction

This series pilot pressure reactor can be design open type elliptical head closure or flat cover lid closure. The leg support design helps autolcaves stand on the floor, witch do not need any steel frame.

The magnetic coupling drive agitator, have no leakage, smooth run, low noise and easy operation, which is widely used for high pressure, high vacuum and high temperature condition.

• Reactor volume: 100ltr, 200ltr, 300ltr, 500ltr

• Pressure:  -1 /FV) to + 30 bar

• Temperature:  -20 °C to +250 °C

• Material:  SA516 Gr70+ SS316L cladding

Pilot plant manufacturers | Pilot plant& Reactor system | Medium-scale pressure reactors

Pilot batch reactor | Pilot reactor systems | Chemical reactor vessel

Product Feature

• Floor stands or moveable cart type.

• Capacity volume: 100 liters to 1000 liters .

• Max pressure: 300 bar;  Max temperature up to 300 ℃

• Low  to high torque magnetic couplings: static seal with no leakage.

• Top Head type: Elliptical head or flat cover lid;    Bottom head type: Ellipsoidal type.

• Available material:SS304, SS316, Titanium, Nickel, Hastelloy B/C, Monel, Zirconium, Inconel.

• Monitor and control: Temperature, pressure, motor speed, operating time, etc.

• Customized according to customers requirement.

ONE CASE OF 500LTR AUTOCLAVE 

500litres high pressure autoclaves 

• Model:FCH-500

• Volume:500liters

• Shell Material： SS31603

• Jacket Material：Q345R（Carbon steel）

• Maximum pressure（Shell）:18bar

• Maximum temperature（Shell）:185℃

• Design pressure（Jacket）：

• Design temperature（Jacket）:185℃

• Heating method：Steam heating（Jacketed）

• Top head type： Eleptical Flange with bolts

• Seal type: Magnetic seal

• Motor power: 5.5kw(Explosion-proof,DIIBT4) Equipped frequency conventer.

• Stirring speed:0-100rpm

• Impeller type:Anchor type（Frame type）

Standard Specifications

Note：The above standard parameters are for reference only. Different processe have their own reasonable selection, not the more complete the function, the better. 

The structure, specification, nozzle size and orientation need to be confrimed after communicating with us.